Equipment Introduction
Specially used for welding the cylinder and two sets of hangers, using multi-point resistance projection welding. One clamping, welding six convex points at both ends of the hanger (three points at each end); manually turn the workpiece position, and weld another hanger again. Use a fixture to locate the relative position of the cylinder and the hanger.
Equipment technical parameters
1.Rated capacity: 200 KVA
2.Duty cycle: 50%
3.Input power: single phase 380V
4.Secondary no-load voltage: 4.04 ~9.0 V
5.Secondary voltage regulation stages: 8
6.Rating: 7
7.Upper electrode working stroke: 80mm
8.Upper electrode auxiliary stroke: 40 mm
9.Maximum electrode pressure: 14KN
10.Lower electrode vertical adjustment: 20 mm
11.Productivity: ≤ 60 times / minute
12.Air source pressure: 0.5MP
13.Compressed air consumption: 5 M3/H
14.Cooling water flow rate: 60 L/min
▲ To enable me give you correct proposal for correct machines, please tell me following details:
A: Technical drawing/Size of product you want to manufacture
B: What's the capacity per shift/day?
Hot Tags: rack welding machine, China rack welding machine manufacturers, suppliers, factory, Testing parts equipment, End cap peeling machine, housing cover, Hydraulic Sheet Metal Roller Machine, water heater shell equipment, Bending machine
