Clench machine

1.The left and right box slides are installed on linear guide rails to ensure the concentricity and linear running accuracy of the left and right slides

2.sets of alignment mechanisms are installed on the upper plane of the box, and the servo motor is used to drive the mold to descend, which can easily adjust the feeding parameters

3.The front of the machine tool is equipped with a safety grating and the back is equipped with a guardrail net

4.The length direction is adjusted by the servo motor driving the box slide displacement; the bed is equipped with a reference scale, the adjustment slide is equipped with an automatic locking mechanism, and the cylinder controls the locking

1.Workpiece quality: After assembly, there should be no defects such as misalignment and loose fastening

2.Barrel size: length 300 ~ 1300mm; diameter Φ315-Φ500mm

3.Production pace: ≥ 1.5 pieces/minute

4.Total installed capacity: ≤5KW

5.Compressed air range: 0.5 ~ 0.7mpa

▲ To enable me give you correct proposal for correct machines, please tell me following details:

A: Technical drawing/Size of product you want to manufacture

B: What's the capacity per shift/day?

Hot Tags: Clench machine, China Clench machine manufacturers, suppliers, factory, Bending machine, Straight seam welding equipment, Special shaped edge spinning equipment, Steel rotary cutting, Pressing laminating machine, Lnner drum body