Synchronization: This machine is a mechanical synchronization mechanism composed of a torsion shaft, a swing arm, and a connecting bearing, with stable and reliable performance and high synchronization accuracy. The mechanical baffle is adjusted by a motor and controlled by a numerical control system.
Sliding block: Hydraulic transmission is used, and the sliding block is fine tuned by the sliding block, oil cylinder, and mechanical stopper. The left and right cylinders of the bending machine are installed on the frame, and the piston drives the slider up and down through hydraulic pressure. The numerical control system controls the value of the mechanical stopper.
Material blocking mechanism: The material blocking is driven by a motor, and two screw rods move synchronously through chain operation. The size of the material blocking is controlled by a numerical control system.
Tabletop section: Using button box operation, the hydraulic folding machine motor drives the baffle to move forward and backward, and the CNC system controls the movement distance, with a reading of 0.01mm. There are travel switch limits for the front and rear positions.
Repair the hydraulic components of the hydraulic folding machine.
For hydraulic folding machines, their hydraulic system is very important, which requires us to pay attention to maintenance work during use in order to better extend their service life. So how should we maintain its hydraulic system? The editor believes that you can analyze from the following two aspects. Let's take a look at the specific situation. Firstly, we will conduct regular cleaning and ensure that it is done at least once a month. During the cleaning process, we should pay attention to the cleaning of the following parts, including the substrate, valves, motors, pumps, and pipelines. These are also the main hydraulic components. As long as these components are intact and undamaged, there will be no problems during use. When cleaning, try not to use cleaning agents to avoid not cleaning, as this will accelerate the corrosion process. If cleaned frequently, all warm water can be used for cleaning. Secondly, after using the hydraulic system for a period of time, we must check whether its various parts are deformed. If there is any deformation, it should be replaced or repaired in a timely manner.
