Advantages of rolling machine

Advantages and Uses
Advantages
Good flange forming effect, high efficiency! Fast speed! Can be rolled into a spring shape! Eliminate previous manual cutting, welding, forging and other processes!
Installation, Use, Maintenance
1. Install on a hard foundation surface, and the equipment remains stable.
2. Strictly abide by regulations and safety operating procedures
3. Operators should understand and master the structure, working principle and maintenance checkpoints of the equipment.
4. Master the method and sequence of starting and stopping (operate according to the instruction manual of the electromagnetic speed regulating motor).
5. The reducer should be lubricated before starting.
6. If the equipment needs to be reversed while running, the speed control switch should be reset first, and the machine should be stopped for 1 minute before starting.
7. When the passive wheel is fed, the fastening bolts should be loosened first, and the round nuts should be tightened and fixed after the feed reaches the scale; the bolts (4-M30) on both sides of the passive wheel should be tightened and fixed. Each time the passive wheel is fed, the workpiece must be completely withdrawn before feeding.
8. During use, the debris in the pressure wheel groove and on the workbench surface should be cleaned in time.
9. The power supply of this machine is three-phase four-wire.