How To Turn On And Off The CNC Bending Machine Correctly?

How to turn on and off a CNC bending machine correctly? "- I believe many friends will be curious when they see this title. What's so difficult about turning on and off the machine? But I have to say, it's not difficult to turn on and off the machine, but it's uncertain whether the method is correct or not. The way of turning on and off the machine is closely related to its service life, and cannot be taken lightly. Friends, please listen to me and explain it in detail.
Before understanding the on/off machine, let's first have a brief understanding of the CNC bending machine:
The CNC bending machine mold includes a bracket, a worktable, and a clamping plate. When in use, the coil is energized by a wire, which generates an attractive force on the pressing plate, thereby achieving the clamping of the thin plate between the pressing plate and the base.
Due to the use of electromagnetic force clamping, the pressure plate can be made into various workpiece requirements, and can also process workpieces with side walls, making the operation very simple.
1, Preparation of CNC bending machine before startup:
1. Other moving parts with centralized oil supply, such as guide rails and rear stops, should be regularly refueled;
2. Check the cleanliness and damage level of the mold, and promptly handle any abnormalities found;
3. Check the parallelism of the rear blocking material and the tension of the drive belt.
2, Correct operation of CNC bending machine startup:
1. First, connect the power supply, turn on the switch on the control panel, and then start the oil pump. This way, you will hear the sound of the oil pump rotating (the machine will not move at this time).
2. Travel adjustment, it is necessary to pay attention to adjusting the travel before use, and it must be tested before using CNC bending. When its upper mold descends to the bottom, there must be a gap of plate thickness. Otherwise, it will cause damage to the mold machine. The adjustment of the itinerary also has electric quick adjustment.
3. When selecting a bending groove, it is generally necessary to choose a groove with a width 8 times the thickness of the board. If bending a 4mm sheet metal, a slot of about 32 should be selected.
4. Rear gear adjustment generally includes electric quick adjustment and manual fine adjustment, using the same method as a shearing machine.
5. Press the foot switch to start bending. The CNC bending machine mold is different from the shearing machine, it can be released at any time. Release the foot and stop, and continue to descend while pressing.
3, Tutorial on the startup steps of CNC bending machine:
1. Follow the operating steps and operate the machine tool correctly;
2. When abnormal situations occur during machine tool processing, immediately stop the inspection and refer to the relevant troubleshooting methods in the Training Manual to troubleshoot;
3. If the machine tool stops due to an alarm during operation, it should be treated differently and not run blindly to avoid damaging the machine tool;
4. The newly executed program must check the workpiece according to the drawing to avoid batch errors;
5. If any abnormal situation is found during the bending process, the mold should be stopped and inspected in a timely manner;
6. Regularly check whether the actual position of the X-axis matches the detected value, and adjust it promptly if there is any deviation.
Only by doing these things well can we ensure that the service life of CNC bending machines can be longer, and that machine failures will not affect the efficiency of the enterprise. Of course, having a good CNC bending machine is the foundation of all of this.